PUSH-ON Technical Information


   BUSH Push-On fittings are especially designed and engineered to complement the BUSH PE-X Pipe and comply to AS/NZS 2537. All BUSH PEX fittings are made from solid DR brass ( i.e dezincification Resistant quality in accordance with AS 2345) and require no heat, flame or solvents when jointing to BUSH PE-X pipe.

Available sizes


Nom. O.D

DN 16 - 16mm

DN 20 - 20mm

DN 25 - 25mm



   BUSH Push-On tools are specifically designed to be used with BUSH PE-X pipe to ensure a simple effective joint. The tools are made from the highest quality materials and are designed to give years of trouble free service.

Important : Tools should be adequately maintained to achieve optimum results.



   BUSH Push-On PEX Plumbing System carries a 25 year warranty when the system is installed by a licenced plumber in accordance with AS 3500 of the National Plumbing code parts 1, 4 and 5  and established installation practices.



   BUSH Push-On PEX Plumbing System is licenced by SAI Global to Australian Standards and complies with Australia and New Zealand standards AS/NZS 2492 for pipe  (Lic. No. 21274) and AS/NZS 2537 for fittings (Lic. No 21276).